MagicBox V1R2B Spécifications télécharger pdf (Page 11)

Regulators (look like transistors with 3 leads)

[ ] Install the 10 volt (black body - marked 750L10C) regulator at IC1.

[ ] Install the 5 volt (black body - marked 750L05C) regulator at IC2.

[ ] Put the supplied 2-pin shorting shunt on header J14. Apply 12-15 volts DC to J1 and check that the

left pad of R1 is at +5 volts and the left pad of R25 is at +10 volts. A variation of +/- 0.25 volts is

acceptable for each measurement.

[ ] Write down your results/observations_________________________________________________

_________________________________________________________________________________

Your PCB should now look like this:

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Pas de commentaire

MagicBox V1R2B Spécifications Page 11