MagicBox V1R2B Spécifications télécharger pdf (Page 16)

Connection Diagram

Note: The audio connection from the receiver should be wired to the MagicBox using a stereo plug on

the MagicBox end, with the ground on the ring terminal and the signal lead on the tip terminal. The J5

and J6 jacks should have their mounting barrels insulated from chassis ground with a 1/16 inch length

of 1/4 inch shrink tubing over the mounting barrel. No nut is used on either of these two jacks.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

MagicBox V1R2B Spécifications Page 16